UNDER VECHICLE SURVEILLANCE SYSTEM

Comm Port Flex Series Under Vehicle Surveillance System

1. The UVSS shall have the camera and lighting integrated into a single module.

2. The UVSS camera shall provide full-color images.

3. The UVSS shall be modular to allow ramps of various widths to be easily configured.       Modules shall consist of end modules and 1-foot-wide expansion modules.

4. Each UVSS section module shall be available with or without a camera/light module.

5. The UVSS camera lights shall be bright white LEDs for illumination.

6. The UVSS LEDs shall provide bright white high-intensity light to simulate bright daylight

underneath a dark vehicle in pitch darkness.

7. The UVSS LEDs shall offer a minimum 100,000 hours of operation.

8. The UVSS shall be based on a speed-bump design and not a flat design.

9. The UVSS shall have a weight capacity of 48 tons.

10. The UVSS shall be designed to operate in harsh environments, including extreme of weather.

11. The UVSS shall not be limited as to the length or height of the vehicle being inspected. It shall be designed to identify objects and be used for any type of vehicle irrespective of length or height to the undercarriage.

12. The UVSS shall provide real-time video for viewing the undercarriage of vehicle. It will not be a line scan system offering still grayscale or color images. It shall be designed to simulate a human eye for depth of viewing as if the person is underneath a vehicle inspecting it.

13. The UVSS shall be stand-alone and independent of the CCTV system. It shall provide real-time video for display, not analysis or alarm reporting. The UVSS requires dedicated cameras in the ramp and may or may not be shown on the security drawings.

14. The UVSS shall include optional storage devices with a recording capacity of up to 1 terabyte or more.

15. The UVSS system shall be manufactured out of rust-proof galvanized steel.

16. The UVSS camera assembly shall have a water-proof housing, rated for submersion to a

depth of 20 meters minimum.

17. The UVSS shall offer has a lifetime warranty on camera/LED housing and for corrosion.

18. The UVSS system will not have a Camera vault that has to be dug in ground to install, this makes the maintenance and replacement difficult and increases construction cost.

19. Everything that is need for inspection shall be inside the ramp and is a part of the ramp. There shall be no requirement to dig a camera vault or other in-ground structures that make installation and maintenance difficult.

20. The permanent systems have the flexibility to positions of the camera / light modules as in the ramp without the use of any tools.

21. The UVSS ramp shall be designed such a way that the users can add additional camera/lights modules, if required for future needs

22. The UVSS shall have a minimum 2-year standard warranty on parts and labor, with an optional 3-year extended warranty.

23. The UVSS ramp shall users to replace the camera/light modules or metal ramps that have been damaged, within minutes.

24. The UVSS permanent ramp frame shall be designed for installation on both concrete and asphalt.

25. The UVSS shall have detailed operating and maintenance manual supplied with each unit.

26. The UVSS system shall display real time video and not static fix images in gray scale or monolithic color.

27. The UVSS system should not require construction of a pit with Heating cooling and ventilation system nor should the system require any sort of sump pump to pump out water for any liquid accumulation.

28. The UVSS system should not require any piping to carry high pressure air and water to clean dust and debris which requires additional compressor and water connections. The system should be maintenance free from cleaning operation.

29. The UVSS system should have multiple cameras with over lapping areas so that no details are missed.

30. They system should not have just one camera with a fisheye effect to distort the view or if a tire comes and stops on it the screen should not go blank. One camera system also poses a down time if that one camera is dead.

31. The UVSS shall have a minimum of five Cameras in a linear setting for complete coverage.

32. The UVSS shall have a history of minimum of 10 years of field installation worldwide.

33. The UVSS shall have a history of installation in International markets / Locations.

34. The UVSS shall have history of installation with a few international defense forces / agencies.

35. The UVSS camera housing shall have a sapphire crystal lens for scratch resistance to protect the camera from scratching.